LDSCL PLUS INSTRUMENT 90/240VAC - DIGITAL REGULATOR FOR CHLORINE WITH TEMPERATURE READING - EMEC

Description

LDSCL PLUS INSTRUMENT 90/240VAC - DIGITAL REGULATOR FOR CHLORINE WITH TEMPERATURE READING - EMEC
(*optional mA module)
With single channel/single regulation and setpoint with PID regulation.

LDSCL PLUS is a digital microprocessor controller for Chlorine with temperature reading and optional mA module (feed forward).
The main working modes are: On/Off, proportional PWM, fixed PWM, PID and Water Meter. Also available FEED FORWARD function for mA module.
Working range: from 0 to 10 mg/l.
The information is displayed on a large LCD display. Using a revolutionary knob, the tool can be easily programmed.
LDSCL PLUS is housed in an IP65 plastic box. In the LDSPH PLUS A version, in STAND BY, the reading remains blocked and probe cleaning starts if enabled for stand By to persist after a timer set in the self clean menu. At the end of the stand by the instrument restarts with the restore time.

INPUTS:
- Standby
- FLOW
- Chlorine level
- Chlorine probe
- Temperature probe
- Pulse emitter counter

OUTPUTS:
- 2 relay outputs (chlorine)
- 2 pulse outputs with optocoupler (chlorine)
- 2 current outputs (Chlorine & Temperature)
- General alarm output

Positioned at the top right is the instrument control knob. The knob can be rotated in both directions to scroll through menus and/or pressed to select the highlighted item.
NOTE: After selecting the item, move to "OK" and press to save and exit the sub-menu. Press "ESC" to exit without saving.

Characteristics:
• "Encoder" knob for instrument control
• Input for flow control
• Control from local or remote network
• Control characteristic: PID
• Communication via web ERMES
• Permanent storage of data (without battery) with system log viewable on display
• Stand-by input
• Alarms: probe damaged (probe check-up) - maximum dosage - threshold - level - flow
• Programming delayed start of the dosage (max 60 minutes)
• Automatic temperature compensation
• Display of the probe value
• Dosing systems: on/off, proportional pulse, proportional PWM and fixed PWM
• Automatic or manual dosing
• mA current output (option)

TECHNICAL DATA
- Working scales: 0 - 10 mg/l CL2
- Inputs: Stand-by/ Flow/ Chlorine level/ Chlorine probe/ Temperature probe/ Pulse transmitter counter
- Outputs: 2 relay outputs (Cl2)/ 2 optocoupler outputs (Cl2)/ 2 current outputs (Chlorine & Temperature)/ General alarm output

CERTIFICATION
- EC Directive 2011/65/EC (RoHS)
- Electromagnetic Compatibility 2014/30/EU
- Low voltage 2014/35/EU