AMS PUMP MF 0340 FP 230VAC - DIGITAL CONSTANT/PROPORTIONAL DOSING PUMP 40 L/H - 3 BAR - EMEC

Description

AMS PUMP MF 0340 FP 230VAC - DIGITAL CONSTANT/PROPORTIONAL DOSING PUMP
Flow rate: 40 L/H - 3 BAR back pressure

AMS MF is the multifunction series because it allows you to set different working modes: Constant, Divide, Multiply, ppm, perc, mlq, batch, volt, mA.
Additionally, you can:
- set automatic re-priming, with a flow sensor installed (sefl
- enable lost shots recovery system (sefl menu)
- set a maintenance dosage in case of plant shutdown (ppm menu - upkeep setting).

The pump is equipped with:
- STAND-BY input
- SEFL input (flow sensor
- LEVEL input (level control)
- ALARM contact output.

The dosage of the pump is determined by the number of pulses and the capacity per single injection.
The adjustment of the single injection is linear only on values between 30% and 100%.
The operating and control parameters are displayed on an LCD display and managed via a keyboard

Characteristics
- Horizontal mounting, with display
- Microprocessor
- Mechanical adjustment of the volume of the single injection
- Pump body with manual bleed (AMS)
- Box: polypropylene
- Ambient temperature: 10 ÷ 45°C (55 ÷ 113°F)
- Additive temperature: 0 ÷ 50°C (32 ÷ 122°F)
- Transport and storage temperature: 10 ÷ 50°C (55 ÷ 122°F)
- Altitude: 2000 m asl
- Installation class: II
- Pollution level: 2
- Audible Noise: 57.4db(A)
- Protection: IP 65 (NEMA4X) - Operating RH %: 85% with t =40 °C; 70% at 45°C

Included in the package:
- PVDF injection valve calibrated at 0.3 bar
- PVDF level probe
- bottom filter in PVDF
- 2 meters of suction hose (8x12 flexible PVC)
- 2 meters of delivery pipe (PVDF 8x10)
- 2 meters of air discharge hose (PVC 4x6)
- 1 operating manual