KMS MF PUMP 0218 LPV+FP 230VAC - DIGITAL CONSTANT/PROPORTIONAL DOSING PUMP 18 L/H - 2 BAR - EMEC

Description

KMS MF PUMP 0218 LPV+FP 230VAC - DIGITAL CONSTANT/PROPORTIONAL DOSING PUMP
Flow rate: 18 L/H - 2 BAR back pressure
LPV version for viscous liquids

The "KMS MF" series dosing pump is the ideal solution for small and medium dosing of chemical products. All the operating and control parameters are available through the use of a keyboard and visualization on a backlit LCD display. The pump is equipped with a "STAND BY" input, "ALARM" (contact) output, "SEFL" (Flow Sensor) input, "LEVEL" input. Automatic re-priming with blow recovery system and work-pause mode.

The dosing capacity of the pump is determined by the number of pulses and the capacity per single injection. Capacity adjustment for single injection is linear only on values between 30% and 100%

Digital multifunction pump (Constant, Divide, Multiply, PPM, Batch, Volt, mA, %, ml/q), with stand-by input, flow sensor input, level control and alarm output. Automatic re-priming with blow recovery system and work-pause mode.

Characteristics
- Horizontal mounting, with display
- Microprocessor
- Mechanical adjustment of the volume of the single injection
- Pump body with manual purge (KMS)
- Box: polypropylene
- Ambient temperature: 10 ÷ 45°C (55 ÷ 113°F)

- Additive temperature: 0 ÷ 50°C (32 ÷ 122°F)
- Transport and storage temperature: -10 ÷ 50°C (14 ÷ 122°F)
- Altitude: 2000 m asl
- Installation class: II
- Pollution level: 2
- Audible Noise: 73.4db(A)
- IP65 protection (NEMA4x): the "KMS DIGITAL" series dosing pumps are made of glass-filled polypropylene which ensures adequate protection against chemical and environmental aggressions.
- LPV version: for liquids with MAXIMUM VISCOSITY 8,000 cPs
- Pump body in PMMA with manual bleeding
- Hydraulic parts included: 3/4" injection valve, 16x22 PVC suction pipe and 8x12 PE injection pipe

Hydraulic parts:
- Pump body: PMMA (polymethyl methacrylate)
- O-rings: Viton
- Body valves: Polypropylene
- Ball valve: INOX + Hastelloy spring
- Diaphragm: PTFE
- Delivery/suction pipes: Polyethylene/PVC
- Max CPS viscosity: 8000

Included in the package:
- PVDF injection valve
- PVDF level probe
- bottom filter in PVDF
- 2 meters of suction hose (flexible PVC)
- 2 meters of delivery pipe (PVDF)
- 2 meters of air discharge hose (PVC 4x6)
- 1 operating manual

Certificates
- Quality Austria - www.qualityaustria.com
- IQNet Association - www.imq.it