PLT TANK 110 LT. IBAC 100 FOR DOSING STATION - EMEC

Description

PLT TANK 110 LT. IBAC 100 - EMEC

Polyethylene containers for reagent mixing and dosing stations. With loading spout and visual level indicator.

Description
- PE container for mixing and dosing stations of reagents.
- with loading spout and visual level indicator.
- the upper part is designed for fixing: dosing pumps, with and without brackets; suction lance; mixing agitator; water loading tap; pump purge pipe; vent valve in the highest part of the container.
- the lower part is designed for the insertion of a drain cock (blind threaded hole).
- all the elements assembled on the container remain within the perimeter of the container itself, therefore the maximum size is given by the diameter of the container.
- all holes are blind so that the fixings remain isolated from the contents of the bin.
- prepared for suction lances mod. LASP4 and LASP5 and for SLL laser level sensor.

Technical features
- material: polypropylene
- temperature: 0-40°C (32-104°F)
- capacity: 110 litres
- dimensions in mm: Ø 495 x h 735

ASSEMBLY
It is possible to make assemblies with:
- 1 dosing pump (or 2 pumps if the agitator is not present)
- 1 stirrer
- 1 water loading tap
- 1 vent valve
- 1 or 2 suction lances
- 1 drain cock
- 2 filters with probe (if the agitator is not present)

The assembly made with two dosing pumps involves the installation of a lance with double suction and a KDPV to connect the two pumps in parallel.

OPTIONAL
- Water loading tap (1/2" or 3/4")
- Drain tap (1/2" or 1")
- Vent valve